Data Transfer
To pull tag data files from your Kairos, insert a USB-A flash drive into the USB slot on the back panel of the controller at any time. We recommend flash drives under 50GB. There are no restrictions on the generation of the drive.
After a brief delay, the controller screen will display: "Copy data files to USB?"
Use the Menu button to choose between "ALL" meaning all files on the Kairos, "ACTIV" meaning the current file, and "NO" meaning you will not transfer any files.
Use the Menu (≡) button to navigate the choices, and Select (✓) button to make a selection.
The controller will briefly display a message that the transfer is in progress, then it will indicate success on the display until you press a button. Afterward, you are free to remove the USB drive and process it through middleware: