Introduction
A ChronoSync is a USB device manufactured by ChronoTrack that contains an ultra-high precision clock that is accurate to the second for 3 days after Syncing.
Please note that a ChronoSync is only compatible with Pro2, BoxScore 3, and MiniTracks running firmware version 5.3.8 or higher.
Sync
- First, ensure that your ChronoSync has been synced through ChronoSync Time Manager.
- On the main screen of ChronOS, tap the clock display in the middle of the screen. This will take you to the Race Ops > Time menu.
- Select ChronoSync.
- Insert the ChronoSync into one of the controller's USB ports. After a few seconds, the ChronoSync Time should appear below the Current Controller Time, as shown here. If the ChronoSync hangs on "Initializing", remove the ChronoSync and re-insert it into a different USB port.
- Click the up arrow on the left to pass the time from the ChronoSync to the controller. A green message will confirm the time set, the status bar along the top of the screen will flash, the LED marquee will flash between red and green to indicate a successful sync. Verify that the ChronoSync Time and the Controller Time match, then remove the ChronoSync.
